mar 28,2016 xdsb8610 v1-z layout: maggie l. p. 1/4 part number: XZM2CYK45WT-9 3.2x2.8mm plcc2 smd led features ideal for indication light on hand held products long life and robust package standard package: 2000pcs/ reel msl (moisture sensitivity level): 3 rohs compliant package schematics notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3. specifications are subjec t to change without notice. yellow (algainp) unit forward voltage (typ.) (i f =20ma) v f 2 v forward voltage (max.) (i f =20ma) v f 2.5 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission cie127-2007* (typ.) (i f =20ma) p 590* nm wavelength of dominant emission cie127-2007* (typ.) (i f =20ma) d 590* nm spectral line full width at half-maximum (typ.) (i f =20ma) 20 nm capacitance (typ.) (v f =0v, f=1mhz) c 45 pf operating characteristics (t a =25c) part number emitting color emitting material lens-color wavelength cie127-2007* nm p viewing angle 2 1/2 min. typ. XZM2CYK45WT-9 yellow algainp water clear 200* 447* 590* 120 luminous intensity cie127-2007* (i f =20ma) mcd * luminous intensity value and wavelength ar e in accordance with cie127-2007 standards. absolute maximum ratings (t a =25c) yellow (algainp) unit reverse voltage v r 5 v forward current i f 50 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 140 ma power dissipation p d 125 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 a relative humidity between 40% and 60% is recommended in esd-protected work areas to reduce static build up during assembly process (reference jedec/jesd625-a and jedec/j-std-033)
mar 28,2016 xdsb8610 v1-z layout: maggie l. p. 2/4 part number: XZM2CYK45WT-9 3.2x2.8mm plcc2 smd led ? yellow led is recommended for reflow soldering and soldering profile is shown below. yellow
mar 28,2016 xdsb8610 v1-z layout: maggie l. p. 3/4 part number: XZM2CYK45WT-9 3.2x2.8mm plcc2 smd led ? the device has a single mounting surface. the device must be mounted according to the specifications. ? reel dimension ? recommended soldering pattern (units : mm; tolerance: 0.1) ? tape specification (units : mm) remarks: if special sorting is required (e.g. binn ing based on forward voltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
mar 28,2016 xdsb8610 v1-z layout: maggie l. p. 4/4 part number: XZM2CYK45WT-9 3.2x2.8mm plcc2 smd led packing & label specifications xzxxx45x terms of use 1. data presented in this document reflect statistical figures and should be treated as technical reference only. 2. contents within this document are subject to improvement and enhancement changes without notice. 3. the product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. user accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. the product(s) described in this document are intended for electronic applications in which a person?s life is not reliant u pon the led. please consult with a sunled representative for special applications where the led may have a direct impact on a person?s life. 5. the contents within this document may not be altered without prior consent by sunled. 6. additional technical notes are available at http://www.sunledusa.co m/technicalnotes.asp
|
